Base Price $316,625. See attached options pricing...
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Accommodations
Forward cabin with vanity and sink, extensive lockers, hanging locker and dovetail drawers Approximately 80? x 60? berth in forward cabin with quilted mattress Furniture grade main cabin settees and seats with contoured cushions Main cabin fit with cherry cabinets and ventilated raised panel doors throughout Through bulkhead raised panel ventilation door to forward cabin Large storage outboard of main cabin seat backs Varnished, drop leaf, solid stock cherry table with center storage bin and two dovetail drawers Forward-facing navigation station to starboard Navigation lockers with installation space for extensive electronics Aft cabin with a full-width 88? x 63?double berth, hanging locker and shelves Storage below berths Cockpit seat locker to starboard Cockpit lazarette hatches port and starboard Propane gas bottle storage in cockpit for two 11 lb tanks Structural fiberglass timbers bonded to hull to carry mast and keel loads Structural bulkheads bonded to hull Bulkheads and risers are pressure laminate or varnished cherry faced marine plywood Hand fit varnished cherry trim throughout Solid stock raised panel varnished cherry cabinet doors with ventilation slots Positive lock polished chrome cabinet hardware 1 1/8? solid stock raised panel varnished cherry passage doors in full cherry framed jambs Polished chrome Mobella mortised door lock sets Solid stock varnished cherry cabinet faces throughout Tongue and groove solid cherry hull ceilings in forward stateroom Solid cherry face, dovetail joined, all wood drawers throughout Custom solid stock main salon table with inlaid Tartan logo and centerline drawer storage Easy maintainance, varnished cherry battened overhead with strategically placed access panels Varnished teak and holly cabin sole with extensive teak banded access hatches Varnished teak handrails placed for security in a seaway Selection of designer fabrics available for interior upholstery
Ventillation
(5) Stainless steel unlimited offshore CE approved deck hatches (12) Cabin side mounted stainless steel opening port lights with fly screens (3) Cockpit mounted stainless steel opening port lights with fly screens (2) 4? Chrome dorade vents with stainless steel guard Lexan sliding companionway hatch with fiberglass spray hood, solid teak hatch boards and trim
Galley/Plumbing
3 burner Force 10 gimbaled LPG stove with oven and broiler (1) 11 lb LPG Tank LPG sniffer with automatic shut off Cherry faced cabinetry with raised panel access doors Cherry faced, dovetailed cutlery drawers 9? deep stainless steel double sinks with premium marine grade galley faucet and manual foot pump with swivel spigot Granicote solid surface galley countertops available in several designer colors Storage under galley sink through ventilated raised panel cherry doors Hinge out galley trash bin with cherry raised panel door access Molded icebox with Granicote solid surface counter top and 4? foam insulation, insulated front and top load access Hot and cold pressure water with easy service access to pump and plumbing Freshwater plumbing features polyethylene tubing and Whale mechanical fittings All below water hose connections are double stainless steel clamped for added security Premium marine grade hoses used throughout 100 gallons of freshwater tankage with distribution manifold Forespar Marelon thru-hull fittings throughout, UL approved and corrosion free Forward cabin vanity with sink, hot and cold water and Granicote solid surface counter top
Head
Marine head with 24 gallon holding tank w/deck pump out and vent Y-valve with direct overboard discharge for offshore use Macerator pump for holding tank discharge for offshore use Snake river holding tank remote level indicator Premium marine grade sanitation hoses with low odor permeability Separate stall shower with Plexiglas enclosure, molded seat and teak floor grate Shower drains to separate sump with automatic electric pump for overboard discharge Premium marine grade head faucet and shower mixer Molded Granicote solid surface counter tops with integral sink Utility storage under sink through raised panel cherry door Hanging/wet locker outboard of shower seat Ample storage in upper vanity
Hull
NPG Isothalic gelcoat for superior gloss retention Epoxy hull laminate producing a strength to weight ratio not attainable in any production polyester laminates Epoxy allows all un-directional fabric laminate, no chopped strand mat Epoxy's superior adhesive strength reduces overall hull weight while increasing strength producing a faster and safer performance cruising yacht Strict resin control through use of resin impregnation machine and calibrated mixing equipment produces glass to resin ratio of 65% glass, 35% resin. (production polyester boats are typically 25% fiber, 75% resin=heavy and brittle) Superior fatigue and cyclic loading characteristics of epoxy ensure a hull that retains its shape and strength longer resulting in higher resale value Extensive internal structure designed to carry rig and keel loads, glass taped into hull using modified epoxy resin Corecell linear polyurethane foam hull coring, provides lightweight structure, stiffness, sound and thermal insulation and superior impact resistance Hull is vacuum-bagged and structure is laminated in ?one shot? thus does not rely on secondary bonding of structural materials Hull is post-cure baked for 24 hours at 145 degrees increasing epoxy laminate characteristics. Final hull laminate is up to 10 times stronger than a typical polyester laminate of similar weight, i.e. greater safety margins while delivering superior performance over normal production polyester hulls 90 degree throw, Marelon, flush thru hull fittings. Marelon fittings are UL and ABS approved and are corrosion free Complete interior paintout for enhanced cosmetics and to seal interior laminate surfaces Built to meet ABS Plan Certification Industry leading, non-prorated 15 year hull structural and blister guarantee Warranty is transferab
Deck
Deck is a balanced composite laminate utilizing vinylester resin, uni-directional ?E?-glass reinforcement, and high strength/stiffness Baltek premium AL 600 balsa coring Our custom resin infusion process creates the best resin-to-glass reinforcement ratio possible resulting in the stiffest, lightest, strongest deck in production boatbuilding Weight saved high increases righting moment improving safety and performance Infusion process with vinylester resin provides a stronger more fatigue resistant deck laminate than typical production polyester deck laminates Deck is locally reinforced at high load areas with additional plies of bi-directional ?E?-glass reinforcement NPG Isothalic gelcoat for improved color and gloss retention Gelcoat is formulated for greater flexibility reducing occurrence of common gel coat crazing White, off-white or sand gelcoat with patterned, molded non-skid surface on horizontal deck areas Balsa coring also offers acoustic as well as thermal insulation increasing interior comfort Core ?windows? at all deck hardware installations. Window is reinforced with solid laminate and isolates hardware installations from cored laminate, reducing stress crazes around hardware often seen in laminates reinforced with plywood and eliminates rot problems associated with decks reinforced with plywood Structurally loaded hardware backed with either FRP or 6061 T6 aluminum backing plates Time-tested hull to deck joint. Deck is fastened to inward facing hull flange with integrally molded hardened 6061 T6 aluminum bar forming a full sheer length backing plate Stainless steel fasteners sized to meet or exceed ABS standard for offshore use, are drilled and tapped into aluminum bar, offering full serviceability from the outside of the boat Deck to hull joint bonded with 3M 5200 adhesive sealant
Keel/Ballast
8,000 lb., 4% antimonial hardened lead casting (beavertail keel option) Template ground for fit and maximum performance Faired and epoxy coated Deep fin or Beavertail bulb design significantly lowers center of gravity improving righting moment. Result is increased sail carrying ability, performance and safety Ballast is through-bolted to hull with cast in place stainless steel bolts. Quantity and size exceed ABS standard for offshore use
Rudder
Console style rack and pinion steering pedestal Stainless steel pedestal guard Single lever engine control with stainless steel handle 6? binnacle compass with stainless steel hood Engine controls mounted on pedestal for easy access and viewing High density, closed cell urethane foam rudder blade with modified epoxy reinforced skins 4? diameter 1/2? wall thickness type 304 stainless steel rudder post High-density, low-friction rudder bearings Bronze rudder stuffing box Emergency tiller
Details and information regarding this vessel are offered in good faith but we cannot guarantee or warrant the accuracy
of this information nor warrant the condition of the vessel. A buyer should instruct his
agents, or his surveyors, to investigate such details as the buyer desires validated. This
vessel is offered subject to prior sale, price change, inventory change, or withdrawal
without notice.
Copyright 1992-2008 MarineSource Network, Inc.
"MarineSource" is a trademark of MarineSource Network, Inc. All Rights Reserved.
The unauthorized use of any spider, robot or other device, or the copying of any portion of this site without written permission is expressly forbidden.
Trademarks, Service Marks, and Copyrights are the property of their owners and are used for descriptive purposes only.
