"One of the most progressive sailboats on the market today!? says Practical sailor. The magazine that accepts no advertising thus gives you a unbiased reviews. They also go onto say ?Honoring tradition while maximizing technology might seem like a contradiction, but the Tartan 3400 make it seem elegant, intelligent, and a good way to go. A modern "duel purpose" boat, she is geared to be cruised comfortably yet still be at home on the race course. She is oven-cured epoxy hull, tapered carbon spar, innovative carbon boom, self tacking jib and a good bit more. She is thus set well apart of the others in her size and price range. There are certainly 34-footers that you might sail away for less, but we found that her capabilities, quality and character made the T3400 a value worth exploring!"
Delivered and Commissioned in San Diego, CA IN STOCK NOW Save Over $12,000. Boat Show Special! $208,880
Extra Equipment
The following extra equipment is included in the Tartan C&C of Southern California Sail Away Price of $214,900
Teak Cockpit Table
Larger 44? Stainless Wheel with Leather
Electric Lewmar Halyard Winch
Heart Freedom 10 Inverter
Prewired for Cabin Fans and Stereo System
Hot and Cold Transom Shower
Courtesy Night Lighting
?Y? Valve and Macerator Pump
12 Volt Evaporator Refrigerator System, Microwave Oven
Ray Marine ST 60 Wind, Depth and Speed
Standard Horizon VHF Radio with Remote in Cockpit
Dacron Full Batten Mainsail & 100% Genoa with Covers
Delivered and Commissioned in San Diego, CA
Accomodations
Forward cabin with extensive lockers, hanging locker and dovetail drawers Approximately 78? x 60? forward berth Furniture grade main cabin settees and seats with contoured cushions Main cabin fit with cherry cabinets and ventilated raised panel doors throughout Large storage outboard of main cabin seat backs Varnished, drop leaf, solid stock cherry table with center storage bin and two dovetail drawers Full navigation station Navigation lockers with installation space for extensive electronics Aft cabin with a double berth, hanging locker and shelves Storage below berths Cockpit seat locker Cockpit lazarette hatches port and starboard Propane gas bottle storage in cockpit for two 11 lb tanks Structural fiberglass timbers bonded to hull to carry mast and keel loads Structural bulkheads bonded to hull Bulkheads and risers are pressure laminate or varnished cherry faced marine plywood Hand fit varnished cherry trim throughout Solid stock raised panel varnished cherry cabinet doors with ventilation slots Positive lock polished chrome cabinet hardware 1 1/8? solid stock raised panel varnished cherry passage doors in full cherry framed jambs Polished chrome Mobella mortised door lock sets Solid stock varnished cherry cabinet faces throughout Solid cherry face, dovetail joined, all wood drawers throughout Custom solid stock main salon table with inlaid Tartan logo and centerline drawer storage Easy maintainance, varnished cherry battened overhead with strategically placed access panels Varnished teak and holly cabin sole with extensive teak banded access hatches Varnished teak handrails placed for security in a seaway Selection of designer fabrics available for interior upholstery
Ventillation
(3) Stainless steel unlimited offshore CE approved deck hatches (8) Cabin side mounted stainless steel opening port lights with fly screens (1) Cockpit mounted stainless steel opening port lights with fly screens (2) 4? Chrome dorade vents Lexan sliding companionway hatch with fiberglass spray hood, solid teak hatch boards and trim
Deck
Deck is a balanced composite laminate utilizing vinylester resin, uni-directional ?E?-glass reinforcement, and high strength/stiffness Baltek premium AL 600 balsa coring Our custom resin infusion process creates the best resin to glass reinforcement ratio possible resulting in the stiffest, lightest, strongest deck in production boatbuilding Deck is locally reinforced at high load areas with additional plies of bi-directional ?E?-glass reinforcement NPG Isothalic gelcoat for improved color and gloss retention Gelcoat is formulated for greater flexibility reducing occurrence of common gel coat crazing White, off-white, or sand gelcoat with patterned, molded non-skid surface on horizontal deck areas Balsa core laminates are stiff, strong and lightweight. Balsa coring also offers acoustic as well as thermal insulation increasing interior comfort Core ?windows? at all deck hardware installations. Window is reinforced with solid laminate and isolates hardware installations from cored laminate, reducing stress crazes around hardware often seen in laminates reinforced with plywood and eliminates rot problems associated with decks reinforced with plywood Structurally loaded hardware backed with either FRP or 6061 T6 aluminum backing plates Time-tested hull to deck joint. Deck is fastened to inward facing hull flange with integrally molded hardened 6061 T6 aluminum bar forming a full sheer length backing plate Stainless steel fasteners sized to meet or exceed ABS standard for offshore use, are drilled and tapped into aluminum bar, offering full serviceability from the outside of the boat Deck to hull joint bonded with 3M 5200 adhesive sealant
Keel/Ballast
3,500 lb., 4% antimonial hardened lead casting Template ground for fit and maximum performance Faired and epoxy coated Deep Fin, Beavertail bulb, or keel centerboard design significantly lowers center of gravity improving righting moment. Result is increased sail carrying ability, performance and safety Ballast is thru-bolted to hull with cast in place stainless steel bolts. Quantity and size exceed ABS standard for offshore use
Galley/Plumbing
2 burner Force 10 gimbaled LPG stove with oven and broiler LPG sniffer with automatic shut off Cherry faced cabinetry with raised panel access doors Cherry faced, dovetailed cutlery drawers 9? deep molded Granicote single sink with marine grade galley faucet and manual foot pump with swivel spigot Granicote solid surface galley countertops available in several designer colors Storage under galley sink through ventilated raised panel cherry doors Galley trash bin through countertop liftout access with cherry raised panel door access Molded icebox with Granicote solid surface counter top and 4? foam insulation, insulated front and top load access Hot and cold pressure water with easy service access to pump and plumbing Freshwater plumbing features polyethylene tubing and Whale mechanical fittings All below water hose connections are double stainless steel clamped for added security Premium marine grade hoses used throughout 60 gallons of freshwater tankage with distribution manifold Forespar Marelon thru-hull fittings throughout, UL approved and corrosion free
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Details and information regarding this vessel are offered in good faith but we cannot guarantee or warrant the accuracy
of this information nor warrant the condition of the vessel. A buyer should instruct his
agents, or his surveyors, to investigate such details as the buyer desires validated. This
vessel is offered subject to prior sale, price change, inventory change, or withdrawal
without notice.
Copyright 1992-2008 MarineSource Network, Inc.
"MarineSource" is a trademark of MarineSource Network, Inc. All Rights Reserved.
The unauthorized use of any spider, robot or other device, or the copying of any portion of this site without written permission is expressly forbidden.
Trademarks, Service Marks, and Copyrights are the property of their owners and are used for descriptive purposes only.
