385 Deale Road - Tracy's Landing, MD
867-9022

Name:
LOA: 60' 3"
Beam: 17' 6
Draft:
        Max: 4' 9"
Model Year: 2008
Model: 59 Classic Pilothouse
Hull:
        Material: Fiberglass
        Type: Semi Displacement

SALON
The windows in the salon are positioned to give maximum light inside the boat and the sight lines, for both sitting and standing, have been carefully laid out to eliminate straining of the neck or ducking of the head to see out. Salon includes an "L" shaped lounge to STBD with a large varnished custom teak 60"x40" hi-lo table with Burl Wood top finished in gloss, extra cabinet storage forward and to port. Forward cabinet includes 42" LCD TV with lift, cabinet storage for glassware, stereo equipment storage, drawers, wine cooler and chairs to port. Your choice of interior fabrics including leather, Ultra-Leather, Ultra-Suede or Sunbrella interior fabrics are available.

PILOTHOUSE
The Pilothouse is the center of activity when cruising and at rest. Port and STBD doors lead to side decks for quick access, protected by a Portuguese bridge with storage, high bulwarks with 1-1/4" S/S hand rails and forward seating. We have tried to keep an open feeling in the pilothouse area by utilizing an open stairway to the fly bridge leaving the space open to the salon. Not all of our competitors have a pilothouse stairway to flybridge, only stairway from cockpit-this is inconvenient when changing stations. The pilothouse features a “U” shaped galley and raised “C” shaped settee with storage under. Pilothouse and FLYBRIDGE include electronics by FURUNO, ICOM and SIMRAD.

Standard with our 59 Classic are Glendinning controls with a complete back up unit for the lower station. Also from Glendinning is a wired hand held remote control that can be plugged either forward or aft giving the captain complete control of thrusters and throttles.

Teak and holly varnished sole Counter tops in teak Dining for 4 on TEAK varnished table Wipers x3 with separate controls Windshield washers Helm chair "Pompanette Platinum" Helm & settee-Dura Touch leather Ritchie Compass SS-1000B Rudder angle indicator

LED overhead lighting w/dimmer Glendinning electronic controls Glendinning back up controls Glendinning remote hand held controls to ease docking Engine, fluid and holding tank gauges 24v "Man Ship" S/S hatch with screen Custom teak hand holds

Galley
Galley is "U" shaped, located in the pilothouse convenient to salon, flybridge, large "C" shaped settee and is open to salon. Storage above counter tops, under settee, under sink and stove top and four drawers outboard of G.E. dishwasher.

Installing a 4 cu ft AC/DC freezer in the lazarette adds freezer capacity for those longer cruising trips.

We have also installed an ice maker/refrigerator on the fly bridge that will supply plenty of ice when entertaining with extra refrigeration space for cold drinks. Our salon features a 24 bottle wine cooler to keep your favorite wine at the correct temperature. This wine cooler is enclosed in a custom teak cabinet with Burl Wood counter top.

3 Refrigerator/1 Freezer drawers under galley counter-marine type Ref/Freezer with teak drawer fronts Kenyon 3 burner cook top 240v with sea rails GE microwave/convection oven Trash compactor/lazarette Freezer 4 cu/ft ac/dc in lazarette Teak handrail-forward counter top 2 slide out shelves under cooktop 2 slide out shelves under settee Extra drawers under settee Storage under settee Storage cabinet under window Storage under counter outboard

Grohe faucet w/sprayer Granite galley counter top Deep S/S mirror finish sink Garbage disposal GE dishwasher w/stainless front Vent above cook top GFI outlets on separate breakers LED overhead lighting

MASTER STATEROOM
Master with centered 72"x80" berth with drawers and storage under. Make up vanity with S/S swing stool, four "Man Ship" ports with two in the stateroom and two in the head for cross ventilation, Shoji sliding screens for privacy with light, clothes hamper, night tables with storage, book storage above and headboard with mirror. Drawers and storage to port. Custom built in 20" LCD TV with DVD player.

VIP & GUEST STATEROOMS
VIP stateroom is forward with center line Queen berth that lifts to access storage. Two large drawers under berth, two hanging lockers and Berber carpet. Separate door from VIP stateroom into forward head.

Guest stateroom to port features two separate berths with headboards and storage under.

Companionway features separate Bosch washer/dryer, stereo speakers and full length storage cabinet all with louvered teak doors.

Both staterooms include LCD TV 4 "Man Ship" non-opening ports in VIP stateroom 2 "Man Ship" opening ports in port guest stateroom "Man Ship" S/S hatch in VIP stateroom LED overhead lights w/dimmers Custom teak panel doors Hanging lockers with louvered doors Cedar lined hanging lockers Drawers under each berth Extra storage lockers in each stateroom

Guest head: Shower with door Ventilation blower in shower Man Ship S/S port Teak grate in shower Teak & holly sole Grohe fixtures Marble vanity w/back splash Lockers above and below sink Tecma Quiet Flush head Custom teak panel doors S/S mirror ceiling Separate shower sump

FLY BRIDGE-WIDE BODY
The expansive wide body fly bridge (14'), accessible both from a pilothouse stairway and cockpit ladder, provides a comfortable area for both lounging and running the boat. The helm area is raised giving an excellent sight line over the bow and outboard standing space is provided to both port and starboard to improve the captains view when docking. The fly bridge has been designed with additional beam by extending the bulkheads to the outboard edge of the overhang. This improved design will provide more seating and fly bridge entertaining area. Fly bridge seating features two helm seats, two settees with storage under and a solid teak grate dining table. The boat deck area of the FLYBRIDGE has over 13' of space for dinghy, crane and sun lounge with storage below. Fly bridge has drain lines to manifold that exits under swim platform, this system eliminates hull streaks. Chart area forward of 1st mates helm seat.

Our outdoor galley features a Panini grill, ice maker, refrigerator for drinks, sink and storage; all enclosed in an easy to clean custom fiberglass cabinet.

Panini style Grill 220v Ice maker/Ref combo Sink Hinged radar arch Radar arch w/lights Radar arch w/speakers w/volume controls 1000# Crane by BROWER US Crane is Hydraulic with rotation Extra S/S hand rails

Helm seats by "POMPANETTE” H2PLS x2 Ritchie Compass "SUNBRELLA" fabric for cushions and covers Bimini with 1-1/4" S/S frame Extra storage lockers P & S Sun lounge with storage under for fishing gear

COCKPIT & LAZARETTE
Hand fit teak cockpit sole - glued down - with large lazarette below includes storage, engine room entrance, water tight door with port, trash compactor and AC/DC 4 cu ft freezer. Cockpit includes seating with storage under, storage cabinet/seat, sliding polished S/S door to salon, door to swim step and fresh & salt water wash downs. Cockpit hatch has gas shocks and S/S ladder.

DECK AND HULL
Hull and deck designed by world renowned naval architect Jack W. Sarin. The underwater exhaust system should insure that the boat is relatively quiet keeping noise and vibration low and free from trailing exhaust fumes. The S/S rudders are foil shaped and sized to insure good tracking and responsive turning ability at both low and high speeds. The long keel provides protection for propellers, longitudinal strength and directional stability.

As all Symbol models the hull is solid laminate on the keel and bottom up to the chine and the cored with cross-linked PVC foam. The entire hull is strengthened with web frames and molded FRP stiffeners. Prop pockets reduce draft and shaft angle for improved performance.

Wide covered side decks and Portuguese bridge provide a safe walk way on main deck. High bulwarks topped with custom S/S 1-1/4" coaming hand rails on Portuguese bridge, main side decks and cockpit for added safety. The fore deck area has two molded in seats and high rails for added safety.

Aft of the Portuguese bridge under the pilothouse windshield there is a custom molded in settee for your guest to relax with the protection of the Portuguese bulwarks with hand rails-see photo of forward settee. We now have four exterior and two interior areas for seating versatility and on-board entertaining.

This 59 Classic is built on a moderate V-hull with keel for better handling at all speeds, best performance and best fuel efficiency at all speeds.

Vinyl ester resin first 3 layers Epoxy undercoat for additional osmosis protection Bottom paint 3 water tight bulkheads 4 compartments with bilge pumps E/R sound proofing by "Soundown" Deck is cored with closed cell foam Non-skid decks in "MOON DUST" Drainage & bilge water manifold system to eliminate most thru hulls 5 year limited hull warranty

Chain locker forward with 3 compartments Wide pulpit for two anchors Two chain locker hatches Salt/fresh anchor wash down Anchor compartment drain overboard Cockpit transom gate Main deck level gates P & S Pilothouse deck level gates P & S Web frame & stringers shaped foam with lamination Engine stringers glass over solid wood S/S mount for each engine E.R. headroom 5'-2" to 5'-7" Bow and stern SS flag staffs

Electronics
Hull #24 will include the New Simrad GB40 Glass Bridge System, the World's most flexible navigation system! Designed to provide owners of large yachts with a total overview of their surroundings and complete control of the vessel, the GB40 promises unparalleled flexibility and superior performance through high design values and the use of powerful technology. Displays include-Chart/Photo, Radar, 3D, Video/Film and Split Screen.

ENGINE ROOM
The Cummins QSM-11 715 HP Quantum Engine Series engines were chosen because of the engines excellent long term reliability record. The 715 HP will provide the new owners with a good combination of range and speed. Cruising at 9 kts the twin engines will burn only 5.6 GPH with a range of 1446 NM. The 59 Symbol has a top speed of 21.7 kts. The 715 HP Cummins engines will deliver total propulsion control, instant diagnostics, improved fuel economy and Cummins covers the waterfront with certified marine service centers around the globe. Onan/Cummins generator was used because of the Cummins 1,500 global service centers around the world.

The fiberglass fuel tanks are forward and athwart-ship to isolate the master stateroom from engine room noise.

Twin Cummins QSM-11 715 HP Electronic engine instrumentation at both stations Dual "RACOR" fuel filters engine Vacuum gauges on Racor Drip less shaft seals "Groco" raw water strainers bronze "Groco" safety sea cocks Polished stainless engine mounts Fresh water wash down 3-24v lights 1-110v lights Fluorescent 110v lighting

Two Rule #3700 bilge pumps E.R. Additional bilge pumps forward and aft Water heater 30 gal by Torrid Work bench with vise Engine oil change pump 24v w/manifold Bilge blowers Shut off valves at all tank supplies S/S fuel manifold system (supply & return) FRP engine drip pans Bilge areas finished smooth with white paint for easy cleaning Fiberglass mufflers-main engine & generator Under water exhaust for engine and generator-lower noise levels

Systems & Equipment
To reduce thru hull fittings Symbol Yacht Company has installed P & S drain manifolds for A/C pumps, shower sump pumps, sinks, bilge pumps and deck drains.

Frame less windows reduce maintenance and provide cleaner look.

Standard in our cruise package are Wesmar stabilizers.

S/S (shaft supports) V-struts designed to allow the maximum amount of water to propellers for best performance.

Fuel/water/holding tank gauges 24v Holding tank by Sealand w/pump 100 gals & vent filter Monitor gauge for each holding tank Bilge alarm by Groco x3 Air horns-KAHLENBERG-dual Nav lights by Aqua Signal Shore tel/TV inlet by Marinco Intercom x6 Engine room fire extinguisher by Fire-Boy CG2-1000 w/auto shut down Tempered glass all windows "Man Ship" S/S opening ports w/trim rings 4 Bladed Nibral props by "Faster" Bow thruster 15 HP 24v "Side Power" Stern thruster 13 HP 24v Wireless thruster control "OZONE" x2 eliminate bilge fumes Central vacuum system SYMBOL NOISE REDUCTION SYSTEMS Soft engine mounts recommended by engine manufacturer Under water exhaust "Soundown" engine room insulation Generator under water exhaust Foam cored hull Drain system to eliminate noisy water discharge from hull sides "Soundown" under carpet pad-salon

Fresh water tanks by Ronco US Fresh water lines quick connect by Whale-water trunk lines 22mm S/S 28" steering wheel for F/B Teak 28" steering wheel for P/H S/S rudders with s/s posts Emcy tiller in S/S Windlass-Muir HR 3500-controls x3 80# s/s plow anchor 150' x 7/16" chain 100' x 3/4" rode Fiberglass pulpit with roller x2 Manual bilge pump 1 1/4" S/S hand rails Shaft rope cutters HD Trim tabs with dual controls Dockside water inlet with pressure safety Headhunter 24v fresh water pump and a 24v back up pump system Prewire and pre-plumb for water maker Drapes for all cabins Screens for ports and hatches Defroster blower 24v w/3 vents

CONSTRUCTION
Cored hull lamination above waterline by vacuum bagging application for quiet operation and strength; Solid hand lamination at bottom for maximum strength.

Excellent workmanship on hull lamination with the flexural and tensile strength meeting ABS "Guide for Building and Classing Motor Pleasure Yachts, 11-1990" requirement.

Closed cell high density PVC foam as structural reinforce core material above waterline for a quiet hull, insulation and strength.

Rust free fiberglass fuel tanks for less maintenance and improve resale.

Vinyl ester resin and thin tissue mat hand laid into first few layers of bottom to prevent osmosis.

Composite structural water tight bulkheads & cabin sole.

316 stainless deck fittings and railings to eliminate rust.

Tempered safety window glass.

U.S. made plumbing hose and fittings for fresh, green and gray water systems.

Removable ceiling panels salon and cabins for easier maintenance.

U.S. made fiberglass engine exhaust pipe and muffler.

Odor safe hose throughout sanitation system.

Odor stop vent filter for holding tank.

U.S. made linear polyethylene holding tank.

Tin coated electrical wire.

AC/DC have separate wiring chase.

Deck, A/C, sink drainage and bilge water manifold system to eliminate many thru-hull fittings.

UV protecting gel coat.

Pocket tunnel for propellers.

Forward bilge extracting fan system.

Back light illuminating breaker panel.

AND THERE'S MORE.

Details and information regarding this vessel are offered in good faith but we cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, inventory change, or withdrawal without notice.